Type 1+2 Tested (BS EN 61643) Surge Protector for Use Primarily on Mains Power Distribution Systems to Protect Connected Equipment from Transient Overvoltages
Standard Duty AC Surge Protector (SPD) Used in Distribution or Control Panel Applications
Heavy Duty AC Surge Protection Device (SPD) for High Risk, Low Tolerance Electrical Service Entrance Applications
Pluggable Surge Protective Device, In Accordance with Type 2/Class II, for 3-phase Power Supply Networks with Separate N and PE (5-conductor System: L1, L2, L3, N, PE), with Remote indication Contact
Surge Arrester Type 2 According to EN 61643-11. Complete Device Consists of A Base Part and Pluggable Module
Universal Varistor-based Plug-in Lightning/surge Arrester for 3-phase Power Supply Networks with Separate N and PE (5-conductor System: L1, L2, L3, N, PE).
Heavy-Duty AC Surge Protector Combines A High-energy Varistor (MOV) Network with A Gas Discharge Tube
Heavy Duty AC Surge Protection Device (SPD) for High Exposure Applications Such As Direct Lightning Strikes Capacitor Bank Switching and Large inductive Loads
Class B Lightning Surge Protectors Lighning Surge Protectors Are Designed to Protect Low-voltage Systems Against High Surge Currents and Overvoltage in Cases Triggered
Class B+C Surge Protection Devices ( Type I+II Surge Protectors) Are Designed By Combining Class B (10/350us) and Class C (8/20 Μs) Lightning and Switching Surge To Be Used in the Equipotential Connection of LPZ 0 and LPZ 2 Zone
