Pluggable lightning current arrester for higher nominal voltages, in accordance with Type 1/Class I, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
lightning current arrestors OBV10-I-50 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection level and high current leakage capability with long service life.
+ Connectable lightning current and surge arrestors
+ High arresting capacity up to 50 kA (10/350μs) per pole
+ Combination arrestors for buildings with lightning protection system
+ Simple standard hat rail mounting
+ Labelled connections
+ Usable in systems with lightning protection class 1-4
Maximum continuous operating voltage
SPD to EN 61643-11
SPD to IEC 61643-1
Lightning impulse current (10/350μs)
Lightning impulse current (10/350μs) [total]
Nominal discharge surge current (8/20μs)
Arrester surge current (8/20μs) [total]
Voltage protection level
Follow current quenching capacity Ipeak
Maximum back-up fuse
Connection cross-section, rigid
Connection cross-section, multi-wire
Connection cross-section, flexible
Welcome to buy the plug-in lightning current arrester, in accordance with type 1/class i, for 3-phase power supply networks with our professional manufacturers and suppliers. We are one of the famous brands and we are equipped with a productive factory at your service. Please be free to enjoy our good price and service.