Universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate N and PE (5-conductor system: L1, L2, L3, N, PE).
The combination lightning current and surge arrestors OBV5-B60 meet the type 1+2 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from an overload, the internal cut-off unit disconnects the arrestor from the mains if necessary.
+ Connectable lightning current and surge arrestors
+ High arresting capacity up to 50 kA (10/350μs)
+ Visual status display
+ Available with optional remote signalling
+ Combination arrestors for buildings with lightning protection
+ Simple standard hat rail mounting
+ Labelled connections
+ Usable in systems with lightning protection class 3+4
Maximum continuous voltage AC
SPD to EN 61643-11
SPD to IEC 61643-1
Lightning impulse current (10/350µs)
Nominal discharge current (8/20µs)
Maximum discharge current (8/20µs)
Voltage protection level
Maximum back-up fuse
Max. cable cross-section flexible (fine-wire)
Max. cable cross-section rigid (single wire/multi-wire)
Welcome to buy the universal varistor-based plug-in lightning/surge arrester for 3-phase power supply networks with separate n and pe (5-conductor system: l1, l2, l3, n, pe). with our professional manufacturers and suppliers. We are one of the famous brands and we are equipped with a productive factory at your service. Please be free to enjoy our good price and service.