Surge protection mainly refers to the power (only mainly refers to the power supply) just opened that moment of intense pulse, because the circuit itself may have higher than the power of the pulse itself; Type 1 Surge Protection or because the power supply or other parts of the circuit Itself or outside the tip of the pulse interference is called the surge.It is likely to make the circuit in the surge of the moment burned, such as PN junction capacitance breakdown, resistance burn and so on.
Surge protection is the use of non-linear components of high-frequency (surge) sensitive design of the protection circuit, simple and commonly used in parallel capacitance and series inductance.
Surge protection, protection against indirect lightning and direct lightning, and other transient overvoltage surges for home and industrial surge protection with relative phase, Type 1 Surge Protection relative, relative center line, centerline and its combination, etc. Protection mode.
Surge As the name suggests is beyond the normal working voltage of the moment over-voltage, it is a moment of intense pulse;
The surge blocking device can effectively absorb the huge energy of the burst to protect the connected device from damage.
When the electrical circuit or communication line due to external interference suddenly generated spike current or voltage, the surge protector in a very short period of time conduction shunt, Type 1 Surge Protection so as to avoid the surge on the other equipment in the loop damage.
Surge protector is when the electrical circuit or communication line due to external interference suddenly generated spike current or over-voltage, in a very short period of time conduction shunt, Type 1 Surge Protection so as to avoid the surge of other equipment in the loop damage to the electronic Device.
Surge protection for the gap discharge type device, the lightning energy leakage capacity, the main role in the use of the line is to discharge lightning energy; pressure limiting surge protector for the zinc oxide varistor device, the lightning energy capacity Small, but its overvoltage suppression ability is good, the main use on the line is to limit the overvoltage. Because of this, usually in the building entrance, such as Asafe series of switch-type surge protection to use to protect the lightning energy, and then, in the post-circuit circuit, such as AM series of pressure-limiting surge protection to limit the former lightning energy diarrhea After the release, Type 1 Surge Protection the higher order voltage generated at the later stage. Two surge protection should be used in conjunction with the equipment in order to ensure the safety of the distribution line.